Bobcat E35 M4902 Error Code

M4902 Fault Code Meaning :

Rear Light Relay Error On

Blue lights Output Short To Battery or Open Circuit

Rear Light Relay Error On

M4902 Error Code

Rear Light Relay Error On is the main cause of M4902 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.

Tip For E35 Model

There is a control lock sensor in the left console which deactivates the hydraulic control levers (joysticks) and the traction drive system when the control console is raised. The console must be in the locked down position for the hydraulic control levers (joysticks) and traction system to operate.

NOTE: If the control lock sensor does not deactivate the control levers and traction system when console is raised, see your Bobcat E35 dealer for service.